Producing customized 3ch video with rs485 multiplexer over one coax of high performance, we are here waiting for you, and we can offer you 3ch video with rs485 multiplexer over one coax wholesale service.
Video Multiplexer System
Model: SD-S802VCS/R
User Manual
Instructions
Via video multiplexer method, realize 3 channels video signal transmission in one video SYV or SYWV cable, also, realize 2 channels video and 1 channel negative data transmission by change-over switch.All data is in real time transmission, HD image ,no delay
Suitable for NEW project or modification works.
Function
1, as project demand, the device is optimized interface, and is convenient for installment with mini volume;
2, can output 3channels video or 2 channel video +1channel negative RS485 control signal optionally through
selector switch;
3, RS 485 control interface can be driven by special chip with 15Kv anti-stastic module ,which can be 64 nodes;
4, under HS frequency reuse way, signals are combined with high speed without any delay and disturbances;
5, adjustable knob is installed in receiver, which can fine adjustment transmssion distance, so that get better video
effect;
6,brightness of video signal can be adjusted at the transmitter according to different camera;
7, 12V DC power supply,built-in Anti-reverse protection circuit;
8, all ports use high quality IVXBNC interfaces;
9, ocular data transmission status with RS485 signal indication;The device has high energy conservation circuit
Specification
Technical parameters |
3channels video control multiplexer technical parameters |
|||||
Transmitter |
||||||
Video index |
485input/output parameters |
|||||
Video index |
VIDEO 1 |
VIDEO 2 |
VIDEO 3 |
chip |
65LBC184/75LBC184 |
|
Centre rate |
38MHZ |
57MHZ |
10MHZ |
Drivable node |
32 |
|
Output signal strength |
105db |
115db |
90db |
Inner 120Ω impedance matching |
No,Need to operate |
|
Video compensate |
Yes, adjustable |
Can not adjust |
PIC protection |
Yes |
||
Video input impedance |
75Ωunbalance |
Band rate |
300-57600bps |
|||
Video input range |
0.8-1.5Vpp |
connector |
Double phoenix terminals |
|||
Joint |
Q9 set |
indicator |
Red data lamp |
|||
Signal bandwidth |
8MHZ |
Equipment size |
||||
Power supply |
DC 12V,230MA(actual working current) |
Transmitter |
110(L)*140(W)*30(H) |
|||
Receiver |
Receiver |
110(L)*140(W)*30(H) |
||||
Video output range |
0.9-1.1Vpp |
Color |
black |
|||
Output polarity |
Positive polarity |
|||||
Output impedance |
75Ω unbalance |
|||||
Power supply |
DC 12V,430MA(actual working current) |
Connection